Showing posts with label Chemistry. Show all posts
Showing posts with label Chemistry. Show all posts

Thursday, August 25, 2011

Lacelle et al. 2010

Lacelle D, Radtke K, Clark ID, Fisher D, Lauriol B, Utting N, Whyte LG. 2011. Geomicrobiology and occluded O2-CO2-Ar gas analyses provide evidence of microbial respiration in ancient terrestrial ground ice. Earth and Planetary Science Letters 306: 46-54.

These authors compared the gas composition of ice from massive ground ice bodies (e.g. 30 000-year-old buried snowbanks) to atmospheric gas concentrations and gas contents from glacial ice. They also cultivated some microorganisms collected from within the ice, and used some non-culture-dependent methods to examine the diversity of those organisms.

Loss of O2, as determined by comparison of the ratio of O2 to Ar in samples, as well as changes to the 13C-CO2 contents indicate heterotrophic microbial activity in the ice, most likely by organisms living in high-salt brine channels in cracks in the ice, using dissolved organic carbon as both energy and C source.

This paper provides an overview of methods for extracting and measuring the gases trapped in microscopic bubbles in permafrost and ground ice, as well as interesting findings about microbial activities.

Lacelle et al. 2008

Lacelle D, Juneau V, Pellerin A, Lauriol B, Clark ID. 2008. Weathering regime and geochemical conditions in a polar desert environment, Haughton impact structure region, Devon Island, Canada. Canadian Journal of Earth Science 45: 1139-1157.

These authors examined the soils and waters near the Haughton crater on Devon Island, to determine the importance of chemical and mechanical weathering in this polar desert environment. They examined dissolved material in streams, lakes, snow, and groundwaters, and the size distribution, shape, and chemical composition of particles from soils in several different local landforms and parent materials.

Despite low temperatures, low precipitation, and very low vegetation presence, significant chemical weathering was found. Signs of chemical weathering, rather than mechanical, include rounded surfaces and pits in sand particles and the concentrations of Ca2+, Mg2+, and HCO3- in waters. Signs of mechanical weathering were also found, including sharp fracture lines in particles.

A gradient of increasing chemical weathering and decreasing mechanical weathering was found from the surface to the permafrost table. Thermal buffering reduces the frequency of frost-driven forces and thermal expansion from daily at the surface to annually at the permafrost table. The permafrost acts as a barrier to water movement, creating relatively wet condtions at depth that allow aqueous chemistry including the dissolution of dolomite to proceed.

Wednesday, August 24, 2011

Xu et al. 2009

Xu C, Guo L, Ping C-L, White DM. 2009. Chemical and isotopic characterization of size-fractionated organic matter from cryoturbated tundra soils, northern Alaska. Journal of Geophysical research 114, G03002.

These authors examined the isotopic composition and organic matter distribution in soil horizons and particle size fractions from two soils in Alaska, a moist acidic tundra and a moist non-acidic tundra. The organic matter quality and quantity in the deeper part of the active layer and down into the permafrost, material estimated to be between 3000 and 7000 years old indicated high susceptibility to microbial activity, that is, decomposition to CO2 and subsequent release to the atmosphere.

I read this paper as part of my background reading to understand the potential uses of a Picarro field-portable carbon isotope analyser; this paper includes a description of the δ13C values of organic matter throughout the soil / permafrost profiles of these Alaskan soils. These values, and the associated discussion of signatures of microbial activity, suggest it is quite possible to distinguish the source of CO2, permafrost-SOM, deep-SOM, shallow/autotrophic, based on the 13C content of effluxing CO2 and / or CO2 at various depths within a soil profile. Table 5 is particularly valuable in this regard.

Tuesday, July 26, 2011

Van Groenigen et al., 2005

Van Groenigen JW, Zwart KB, Harris D, van Kessel C. 2005. Vertical gradients of δ15N and δ18O in soil atmospheric N2O – temporal dynamics in a sandy soil. Rapid Communications in Mass Spectrometry 19: 1289-1295.

These authors examined the production and consumption of N2O in soil profiles using stable-isotope analysis. Enzymatic processes in the microbial nitrification and denitrification pathways all strongly fractionate isotopes of both N and O, with products of reactions significantly depleted in the heavier isotopes. This allows identification of regions of soil producing or consuming N2O by distinguishing between local production and diffusion through the soil layer.

Similar to my own studies, gas concentrations were measured using diffusion wells, in this case probes buried in the soil and sampled by syringe; gas samples were measured by GC-IRMS. Internationally-recognized isotope samples for N2O are not available, so standards for analysis were prepared from commonly available laboratory chemicals and abiotic chemical reactions to completion to avoid fractionation (e.g. reduction of N2O to N2 over copper at 600ºC).

The largest concentrations of N2O were found at the deepest sampling position, 90cm. There was a negative logarithmic relationship between the δ15N value of N2O in the soil and depth, consistent with a relatively large single source of N2O at 90 cm and consumption shallower in the soil combined with vertical-upwards diffusion of N2O; reduction of N2O to N2 enriches the remaining N2O pool for 15N.

Friday, December 3, 2010

Davidson et al. 1991

Davidson EA, Hart SC, Shanks CA, Firestone MK. 1991. Measuring gross nitrogen mineralization, immobilization, and nitrification by 15N isotopic pool dilution in intact soil cores. Journal of Soil Science 42: 335-349.

These authors evaluated the use and limitations of the isotope-pool dilution technique when studying nitrogen dynamics in soil. Because addition of inorganic nitrogen compounds (NH4+, NO3-) can stimulate microbial activity in N-limited systems such as most soils, estimating the rate of these processes by tracking 15N through a system will almost certainly overestimate these rates. The isotope-pool dilution method, on the other hand, measures the dilution of enrichment in the nitrogen pool at the end of a particular process, relying on the assumption that additional product of metabolism will have negligible effects on the magnitude of that metabolism. In this study, immobilization of nitrogen was the main focus of investigation, comparing 15N isotope dilution in pools of either 15NH4+ or 15NO3-.

There are three key assumptions for the isotope-pool dilution method in this context. 1. Microorganisms do not discriminate between 15N and 14N; 2. rates of processes measured remain constant over the incubation period; 3. 15N assimilated during the incubation period is not remineralized. Previously, these assumptions had been evaluated for well-mixed soils, but not for unmixed field-collected soil samples. While fractionation by biological processes certainly does result in discrimination between isotopes of nitrogen, it is of negligible importance when injected solutions are very highly enriched and incubation periods are relatively short; in this case, injections were more than 90% 15N and incubations ran for 24 hours. Rates of measured processes will change if the population and / or activity of microorganisms changes, but again, over a 24-hour incubation period under controlled conditions this is unlikely. Highly enriched injections allow the use of small injection volumes, limiting the impact of nutrient enrichment. These authors were able to measure the remineralization of immobilized 15N, and estimated that between 1.0 and 1.6% of injected 15NH4+ appeared in the 15NO3- pool after 24 hours; they consider this an insignificant amount, but caution that longer incubations would almost certainly result in much more problematic amounts of remineralization.

This paper is clearly a major part of the basis of the project I am currently engaged in with Katherine from our 2009 field season at Alexandra Fjord. I probably should have read this paper long ago. The three main conclusions stated by these authors at the end of their paper I think can be quoted verbatim as justification for both why I (should have earlier) read this paper, and as a reminder to myself to include this paper in the methods & materials section of the eventual manuscript.
"Three points should be considered when applying the isotope dilution method.
1. Accurate estimation of both 14N and 15N initial pool sizes is important. Abiotic consumption of label, such as by clay fixation, can cause significant errors. A subset of intact cores may need to be destructively sampled directly after adding 15N for estimation of initial pool sizes.
2. Homogeneity of 15N enrichment throughout a soil sample is not possible, and perfectly uniform distribution of added label is not necessary. However, significant errors can arise from a bias in 15N distribution that is concurrent with a non-random
distribution of microbial processes. Distribution of label should, therefore, be as uniform as possible.
3. In situ gross immobilization rates may be overestimated by isotope dilution methods and underestimated by chloroform fumigation methods, depending on which (if any) kN factor is applied to the latter. Gross mineralization and gross nitrification estimates from isotope dilution are more reliable because these rates should not be affected by addition of 15N label in the form of the process products."

Tuesday, September 28, 2010

Trinsoutrot et al. 2000

Trinsoutrot I, Recous S, Mary B, Nicolardot B. 2000. C and N fluxes of decomposing 13C and 15N Brassica napus L.: effects of residue composition and N content. Soil Biology and Biochemistry 32: 1717-1730.

These authors studied the decomposition process by soil microorganisms when isotope-labelled crop residues were added to soil. The crop used, oilseed rape Brassica napus (also known as canola) varies its nitrogen content of tissues, and the C:N ratio, depending on levels of N inputs by fertilization. This allows variation in input organic matter quality by manipulation of growing conditions; in this experiment, both carbon and nitrogen inputs to the plant included stable-isotope labels, in the form of 13C-CO2 and 15N-KNO3. Plant residues were added to soils and incubated for 168 days.

Initial C:N ratio and especially the labile-C fraction of organic-matter inputs are major controls of both the rate of decomposition and fate of matter through the system. Additionally, temperature, particle size of residues, and water content in the soil also strongly influence decomposition processes.

Here, N mineralization (the formation of NO3- and NH4+ pools in the soil from organic-N precursors) occurred in two phases. In the early phase, up to about 3 weeks, the N cycle resulted in net mineralization. Later, mineral N pools were depleted and N was immobilized, that is, incorporated into the tissues of microbial cells.

Carbon dioxide release during the experiment occurred through two pathways. The more direct route was rapid mineralization of organic matter, which I interpret as non-incorporation of organic matter by microbes, consuming such material but metabolizing it rapidly through respiration. The second, presumably slower route was through metabolization of material after incorporation into cells through respiration. Either way, the ultimate fate of much of the organic-C in the residues was release as CO2.

Differences in the N-content of residues affected decomposition rates early in the experiment, but by about 4 months the differences between high-N and low-N residues had evened out. Only a small fraction of labelled N from residues ended up in soil mineral-N pools; the majority was either immobilized into microbial cells or remained in recalcitrant organic matter fractions. Immobilization of unlabeled, SOM-derived N was enhanced by the addition of C through a substitution effect.

These authors conclude that 15N labelling was fraught with difficulties, and both under- and overestimated some pools and processes. However, the use of their model, named NCSOIL, improved their ability to trace the fate of added material through the system. This paper represents a study similar in some ways to our planned course activity in the special topics in soil science course, fall 2010.

Tuesday, April 20, 2010

Stark and Hart 1996

Stark JM, Hart SC. 1996. Diffusion technique for preparing salt solutions, Kjeldahl digests, and persulfate digests for nitrogen-15 analysis. Soil Science Society of America Journal 60: 1846-1855.

These authors evaluated the recently-developed Teflon-encased-acid-trap technique for collecting nitrogen from water samples for analysis, especially stable isotope (15N) analysis. Earlier acid trap techniques, which rely on the chemistry of ammonium/ammonia in solutions of varying pH, were based on suspended small vials containing acid solutions above a larger volume of sample solution at high pH. Ammonium present in the sample is converted to ammonia by high pH, and escapes solution into the gas phase. It is captured in acid solution; in a closed container with a separate acidic region, ammonium will migrate from the alkaline sample to the acid trap. Suspended trap designs are vulnerable to a number of problems, including vulnerability of the acid trap to contamination by alkaline solution and subsequent loss of captured ammonium. Teflon will pass gases but not liquids, and therefore provides an ideal barrier between the sample and the acid trap that will permit ammonia to enter the trap.

These authors conducted a set of six experiments to evaluate the utility of Teflon acid traps. First, blanks were evaluated, to determine the sensitivity of the technique to nitrogen derived from contamination in the various materials of the experiment (filter paper, Teflon, plastic bottles, etc.). There was some nitrogen detectable from these non-sample sources, but a correction factor could be constructed based on including a few blanks in sample sets. The second experiment examined the recovery of ammonium from 2M KCl solutions. These solutions are very similar to the solutions extracted from soils of Alexandra Fjord in 2009. As might be expected, incubation time correlated with recovery of ammonium; in addition, Teflon traps performed better over shorter incubations (up to about 6 days) than did suspended traps, though the difference disappeared at the longest (8 days) incubations.

The third experiment was of greatest interest to me. They examined the open-bottle time necessary to eliminate residual ammonium from samples used in experiment 2, and the incubation conditions to collect NO3- -derived nitrogen using Devarda’s alloy to reduce NO3- to NH4+. Residual ammonium left in solution at the end of the first reaction would contaminate NO3- examination and lead to overestimation of NO3- contents; this is especially true when the two forms of nitrogen have been previously enriched with 15N to different degrees. There is a trade-off between open bottle time (ranging in these experiments from one to five days) and recovery of NO3- from samples; long open-bottle times appear to lead to an unknown chemical change in samples, which these authors speculate, may involve sorption of atmospheric CO2. Long ammonium-collection times (i.e. experiment 2) do tend to collect the great majority of ammonium present, recovering on average more than 97% of ammonium from known-concentration samples. This suggests to me a long and potentially nitrate-losing open-bottle incubation is not necessary if ammonium collection has proceeded for at least six days. Agitation of samples, in these experiments often once per day, resulted in a strong improvement in nitrogen capture over at least the shorter (24-96 hour) incubations; our use of continuous agitation for seven days therefore seems likely to capture nearly all ammonium present in samples.

Experiments 4 through 6 were of little interest to me, as I am unfamiliar with Kjeldahl digests and persulfate digests and do not plan to use these techniques in my studies. From what I could glean based on my limited knowledge, the Teflon-acid-trap technique appears to work well with Kjeldahl digests and persulfate digests.

Overall, the Teflon-acid-trap technique performed very well, and had significant ease-of-use and contamination-avoiding advantages over earlier methods. One caution put forth by these authors is regarding the H2 gas evolved during Devarda’s alloy incubations; strong build up of gas can cause leaks, potentially allowing NH3 to escape and leading to underestimates of sample nitrate contents. They suggest storing bottles upside-down during such incubations, as leaks will then include sample solution, and leaking bottles can be easily identified.

Complete recovery of nitrogen was not possible on a routine basis using this technique, but 15N isotope ratios do not rely on 100% recovery if ammonium and / or nitrate concentrations have been measured by an independent method, such as the widely-used colorimetric techniques. The two isotopes of nitrogen do not migrate differently between alkaline sample and acid trap, thus even at relatively inefficient recovery rates, isotopic ratios are maintained. Blanks are important, but in general this technique is robust, reliable, and easy to conduct.